Description
SCHNEIDER ISH070/60022/0/1/00/0/00/00/00 Product Introduction
Model: ISH070/60022/0/1/00/0/00/00/00
Brand: Schneider Electric
Series: Schneider ELAU PacDrive iSH Series
Core Function: Industrial precision motion control and execution
Type: Servo Motor
Key Specs: 680 VDC, 2.2Nm, 6000 rpm
Supply Status: in stock
Stock: 17
Warranty: 18 months
Ship From: China
Where It’s Used (Applicable Systems)
Let me be real—this servo motor isn’t for basic, no-frills production lines. It’s built specifically for Schneider’s PacDrive automation ecosystem, and it works best when paired with ELAU PacDrive 3 controllers and LXM series servo drives. You won’t find it on a simple conveyor that just moves parts from A to B; it’s for the tough jobs where precision can’t slip.
Honestly, we use it most in industries where small mistakes cost big—things like food packaging (high-speed filling and capping), printing (keeping paper aligned perfectly), textile mills (precision yarn winding), and even light automotive assembly stations. These are all systems that need smooth, accurate motion, and this motor delivers that day in and day out[1][2].
It fits right into 2-4 axis medium-precision motion control systems. For example, on a bottle labeling line, we’ll use one of these motors to drive the label applicator and another to sync the bottle conveyor speed. The best part? It’s pre-matched to PacDrive systems—no custom wiring or tricky programming. Plug it in, load the pre-set parameters, and it’s ready to run. That saves us hours of debugging during setup.
One thing to watch out for: If your system only needs steady, slow motion, don’t waste money on this. A standard induction motor will do the job cheaper. But if you need fast acceleration, tight positioning, or consistent torque, this is the one you want—it’s built for those high-demand, high-precision tasks[2][8].
Main Functions
As someone who’s installed and maintained these motors for years, I can tell you—its value isn’t in fancy features, but in reliability and performance. Here’s what it actually does on the factory floor, no fluff:
- Precision motion control: It uses a high-resolution SINCOS encoder that feeds real-time position data back to the drive[8]. That means no overshoot when changing speeds, and repeatable positioning that’s spot-on—critical for printing registration or labeling accuracy. I’ve seen it run for months without losing calibration.
- Strong, consistent torque: With 2.2Nm of continuous torque and 8.7Nm of peak torque, it handles medium loads with ease[2]. Whether it’s driving a capping head or a feed roller, it doesn’t bog down—even during sudden load spikes. That’s a big step up from cheaper motors that stall or overheat.
- Stable dual-voltage operation: It runs on 680VDC main power for muscle, and 24VDC auxiliary power for the control and encoder circuits[8]. This dual setup protects it from grid fluctuations—no more lost position or unexpected shutdowns if the power dips a little. Trust me, that’s a lifesaver in busy plants.
- Easy integration with PacDrive systems: It has a built-in SERCOS interface that connects directly to PacDrive controllers[2]. No adapters, no protocol conversion—just plug and play. We used to spend half a day setting up third-party motors; with this one, we’re done in an hour.
- Tough enough for the shop floor: It’s rated IP65, so it can handle dust, oil splatters, and even light moisture[2][8]. I’ve installed these in dirty packaging plants and they hold up—way better than motors with lower protection ratings that need constant cleaning.
Detailed Technical Specifications
These are the specs we actually check when picking or installing this motor—none of that irrelevant jargon, just the stuff that matters for day-to-day operation:
- Product Type: Permanent magnet synchronous servo motor (brushless design), no brushes to wear out—less maintenance and longer life[2].
- Flange Size: 70mm standard flange, easy to mount and replace with other ISH070 series motors[6][8].
- Rated Voltage: 680 VDC (main power); 24VDC (auxiliary power for control/encoder)[8].
- Rated Current: 2.7A (matches the 2.2Nm continuous torque rating).
- Torque: 2.2Nm continuous torque; 8.7Nm peak torque (handles short-term overloads)[2].
- Rated Speed: 6000 rpm, perfect for high-speed production lines like packaging or printing[2][8].
- Encoder: High-resolution SINCOS encoder (supports absolute or incremental modes), ensures precise feedback and positioning[8].
- Protection Level: IP65, dust-tight and protected against low-pressure water jets—ideal for industrial environments[2][8].
- Operating Temperature: -20°C to 60°C, works in both cold warehouses and warm production areas without issues[6].
- Storage Temperature: -40°C to 85°C, safe to store for long periods without damage.
- Mounting Type: Standard flange mounting (4 mounting holes), fits most industrial brackets[6].
- Shaft Design: Keyed shaft, easy to connect to gears or pulleys—no complicated couplings[8].
- Weight: Approximately 1.45 kg, compact and lightweight enough for tight cabinet spaces[6].
- Cooling Method: Self-cooling, no extra fans needed—saves space and reduces maintenance[8].
- Compatibility: Fully compatible with Schneider PacDrive iSH series systems, ELAU PacDrive 3 controllers, and LXM series servo drives[2][3].
